IBM 7040-5701 > 10/100/1000 Base-TX Ethernet PCI-X Adapter - FRU > 00P3056, 00P4501, 00P6130, 03N6524, 09P5389 - Feature > IBM 5701

(#5701) IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter

The IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter is a Full-Duplex Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via the PCI-X bus and connects to the network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed.

Note: For optimum performance, adapter should be placed in a 64-bit PCI-X card slot.

Limitations: The 1000 Mbps speed is not supported in Half-Duplex (HDX) mode.

• Attributes provided: One full-duplex 10/100/1000Base-TX UTP connection to a Gigabit Ethernet LAN.
• Attributes required: One available PCI or PCI-X card slot
• For 7040-61D: (#5701)
  • Minimum required: 0
  • Maximum allowed: 20 (Initial order maximum: 20)
  • OS level required: AIX 5.1 with the 12/2002 or later Update CD, AIX 5.2 with the 12/2002 or later Update CD
  • Initial Order/MES/Both/Supported: Both
  • CSU: No
  • Return parts MES: No

Note: Maximum of 5 adapters per #6563 PCI planar. Maximum of 10 adapters per #6571 PCI-X planar. For optimum Gigabit Ethernet PCI-X Adapter performance, systems manufactured prior to October 25, 2002 may require a system firmware update.

Option Part Numbers

• 00P3056
• 00P4501
• 00P6130
• 03N6524
• 09P5389

 Drawer Guide

 StorFacts Report